FDA Device Recalls in 2022
777 recalls found
December 2022
DePuy Synthes SYNMESH 10MM DIA 18MM HEIGHT (TI) Product Number: 495.344 - Product Usage: is a vertebral body replacement device for the cervical, thoracic and lumbar spine. Titanium implants in various footprints and heights enable the surgeon to choose the configuration that is best suited to the patient s individual pathology and anatomy. The mesh may also be trimmed for a custom fit. The implants can be inserted anteriorly, laterally or anterolaterally.
Incorrectly Labeled 'general medical device,' printed on the statutory label of the SYNMESH CAGE SYSTEM instead of 'specially controlled medical device"
Synthes GMBH is reporting Recall of SYNMESH CAGE SYSTEM Japan-Specific Country Label Issue . The Japan affiliate will be administering the recall per their local regulations, the week of September 21, 2020. Affiliate will notify Japanese sales representatives. Japanese sales representatives will hand-deliver notices to affected hospitals / surgeons. The Japan affiliate is responsible for managing the rework process. Returned devices will be reworked with correct Japan-specific labels and revised lots
Normand Remisol Advance Data Manager is a software device that interfaces between laboratory information systems (LIS) and laboratory instruments.
Instructions For Use for software versions 1.5 to 1.9 did not provide sufficient instructions regarding the proper programming and testing of rules. Therefore, rules written by users that were not validated or incorrectly validated may lead to erroneous results.
On 03/25/2021, the firm sent an "URGENT MEDICAL DEVICE RECALL" Notification letter via postal mail or email to customers informing them that Instructions For Use for software versions 1.5 to 1.9 did not provide sufficient instructions regarding the proper programming and testing of rules. Therefore, rules written by users that were not validated or incorrectly validated may lead to erroneous results. In a worst-case scenario, unvalidated or incorrectly validated rules may lead to the generation of erroneous test results that may be reported out of the laboratory. For customers using versions 1.5, 1.6, 1.7, 1.8 or 1.9 are instructed: 1. Validate the rules that were unvalidated or incorrectly validated, according to laboratory procedures 2. All rules set up in the future must be validated, according to laboratory procedures The Recalling Firm strongly encourages the use of the testing instructions provided with this notification, "REMISOL Avanced v1.5 through v1.9 Rule Validation Procedure". The Recalling Firm is currently updating the Instructions For Use for the affected versions and is targeting May 2021 for availability. Customer are also instructed to: -Share this information with their laboratory staff and to retain this information as part of their laboratory Quality System documentation. -If customers are a centralized license holder, they are asked to provide the other affected laboratories of their organization or association with a copy of the notification letter. -Within 10 days of receiving this customer notification, customers are asked to communicate with the Recalling Firm either: 1) Electronically, if they received this communication via email, or 2) Manually, complete and return the enclosed Response Form. For further questions, contact the Recalling Firm via -Website http://www.beckmancoulter.com or -By phone - contact their local Beckman Coulter representative.
Holder HKHZ 19 for use with Quadrox-i and Quadrox-iD Neonatal / Pediatric Oxygenators, Model Number: 701047495 - Product Usage: The Holder HKHZ 19 is an accessory to QUADROX i and QUADROX iD Neonatal / Pediatric oxygenator and is being used as a single holder for QUADROX i and QUADROX iD Neonatal / Pediatric Oxygenator and can also be used in combination with the holder's arm (016061) to use in cardiopulmonary bypass procedures (CPB) in a pediatric patient population.
Removal for a specific lot, lot number 70128207, of Holder HKHZ 19 for use with QUADROX iD Pediatric Oxygenator. The Holder may not always snap and securely hold the oxygenator as intended.
Getinge sent a customer letter dated July 2020 instructing customers to remove the affected products from areas of use and return the product(s) to Getinge following the provided instructions.
LeverEdge Contrast Injector: 35 cc syringe with ISO 594 female luer lock - Product Usage: intended to be used to perfuse contrast medias into the vessels for angiographic procedures, Catalog #: 4100-00.
The firm received a complaint regarding particulate found in the packaging foam that could contaminate the sterile field.
On 04/01/2021, LeMaitre issued an Urgent Medical Device Removal notice via letter informing customers that particulate contamination has been detected from the packaging foam with these devices.
syngo.CT software version VA48A_SP5.5 in the following SOMATOM computed tomography models: SOMATOM Definition Edge-Model #10590000; SOMATOM Definition AS Model #8098027; SOMATOM Definition Flash Model #10430603
SOMATOM Definition Edge, SOMATOM Definition AS, SOMATOM Definition Flash with software syngo.CT with Software version VA48A_SP5 may result in scanning workflow interruptions and unexpected user notifications. and may result in a delay in diagnosis and/or patient rescans
Siemens issued notification Urgent Medical Device Correction letter on 7/25/19 issued via electronic mail to consignees or by USPS certified mail if a consignee email address was not available. Letter states problem, health risk, action to take: The remote software update installation process will require approximately 30 minutes for completion. The process is completely automatic; make sure the system and power are stable before and during the process and do not switch off the system during the update process. Siemens highly recommends starting the installation when the scanner will not be in use or when the necessary time for the update to be completed can be scheduled. If your system is connected to Siemens Remote Connection, this update will be performed remotely. Following the corrective action, the cause will be eliminated and a recurrence of the identified issues is prevented. If you have any questions, please contact our service organization at 1-800-888-7436.
Revolution Apex, Revolution CT with Apex Edition, Model 5995000-5 - Product Usage: The system is intended for head, whole body, cardiac and vascular X-ray Computed Tomography applications.
There is a potential for a smudge artifact that could be suspect for pathology in some images due to incorrect settings.
The recall strategy outlined below addresses the depth of the recall and recall notification (customer letter) effectiveness check. This issue will be resolved by sending an Urgent Medical Device Correction letter (attached) to customers with potentially affected systems. This letter will inform the customer of the issue and provide safety instructions for continued use. GE Healthcare will inspect potentially affected systems and correct, if needed. In the U.S., this letter will be sent by a traceable means. This letter will be sent to the following titles within the affected accounts: Director of Clinical/Radiology, Risk Manager/Hospital Administrator, Director of Biomedical Engineering. GE Healthcare will document customer acknowledgment of the receipt and understanding of the letter, and the inspection and correction, if needed, of potentially affected systems. Records will be retained per our processes and procedures.
Paltop Dynamic Dental Implant Dia 3.25mm L 13.0 mm, Catalog Number 21-70020
Some of the implants were packaged with a Standard Platform Cover Screw instead of a Narrow Platform Cover Screw. The Standard Platform Cover Screw will not fit in the Narrow Platform implant.
Urgent: Medical Device Recall notification letters dated 11/18/19 were sent to customers. Please discontinue use. Attached is a Reply Communication form that should be used to let us know whether the product has been used or will be returned. Once we receive that Form, a Customer Service agent will reach out to you with return instructions and provide a label if necessary. Paltop Advanced Dental will replace the implants that are in stock.
VITROS Chemistry Products VersaTips - Product Usage: used to dispense samples to MicroSlide assays and sample and reagent fluid for MicroWell assays. In addition, VersaTips are used to dispense R1 Reagent Fluid into cuvettes in combination with sample fluid for Micro Tips Assays.
A deformity affecting a specific lot of VITROS Chemistry Products VersaTips. Deformed VersaTips results may be biased by up to +/-16% for both immunometric and competitive assays.
On 01/18/2021, Ortho Clinical Diagnostics issued an Urgent Product Correction Notification via e-mail due to a a deformity in a specific lot of VITROS Chemistry Products VersaTips. The affected product is to be no longer distributed and discarded.
JUDKINS PACK
Component Part Number: 19537LBL (LBL, SHEET OF 39, ASSORTED, STDSZ, MULTI W/BLK INK, WATERPROOF) is being reported as intermittently mixed with an incorrect medication label sheet throughout the specific Presource kit SANHDJTVCF Judkins Pack lot # 525067.
The notice "Presource Kits Containing an Incorrect Medication Label Sheet" and reply form dated 02/11/2021 were sent to the customer. For questions, requiring additional labels, or desire special assistance relating to this notice, contact Cardinal Health Quality Systems at 800.292.9332.
PROCEED Surgical Mesh Hernia Mesh Oval, 15 cm x 20 cm
The firm is recalling the PROCEED Surgical Mesh device, because it is a sterile device, and a customer found a hair inside of the primary packaging of a single unit.
Note: This recall is specific to this single lot of PROCEED Surgical Mesh. Health care practitioners who have treated patients using this product should follow those patients post-operatively in the usual manner with no additional action required. Product subject to the recall in your inventory can be identified by the product code information described in the above table. all unused PROCEED Surgical Mesh subject to this recall are required to be returned. Please utilize attachment 1 for assistance in identifying the product lots subject to this recall. ACTION REQUIRED: 1. Examine your inventory immediately to determine if you have product subject to this recall on hand and quarantine such product(s). 2. Remove the product subject to this recall and communicate the issue to relevant operating room or materials management personnel, or anyone else in your facility who needs to be informed. 3. If any product subject to this recall has been forwarded to another facility, contact that facility to arrange return. Please consider including a copy of this recall letter when communicating. 4. Complete the Business Reply Form (Attachment 2) confirming receipt of this notice and return to Ethicon sales representative or distributor by [INSERT DATE]. Please return the Business Reply Form even if you do not have products subject to this recall. 5. Follow instructions in the letter and immediately return unused impacted PROCEED Surgical Mesh subject to this recall to Ethicon sales representative or distributor. To receive credit reimbursement, customers must return product subject to this recall. Any non-affected product and any product returned after the date specified will not receive credit. 6. Keep this notice visibly posted for awareness until all product subject to this recall has been returned to Ethicon Korea. While processing your returns, please maintain a copy of this notice with the product subject to this recall and keep a copy for your re
iQ200 Series Urine Microscopy Analyzer with Barcode Reader Model NFT-2100, Catalog #s: 800-3046, 800-3047, 800-3052, 800-3053, 800-3802, 800-3803, 800-3900, 800-3920, 800-3925, 800-3931, 800-3933, 800-3934, 800-3935, 800-3937, 800-3950, 800-3951, 800-3042, 800-3043, 800-3044, 800-3049, 800-3050, 800-7190, 800-7713, 800-7714, 800-7715, 800-7101, 800-7102, 800-3938, 800-7157
iQ200 Series Urine Microscopy Analyzer may intermittently fail to read urine sample dilution barcode labels causing erroneous results that could delay treatment for health conditions such as hematuria.
An urgent medical device recall letter, dated 11/10/2017, was sent to customers informing them that Beckman Coulter was initiating a field action for the iQ200 Series Urine Microscopy Analyzer with Barcode Reader, which may fail to read urine sample dilution barcode labels instead defaulting to no dilution, dilution factor of 1:1. In addition, this product may also fail to read urine sample dilution barcode labels, when the rack is rejected, leading to no results. Customers were informed of the issue, impact, action, and that the resolution was being investigated. Customers were instructed to respond within 10 days: electronically via email or manually by completing and returning the response form accompanying the device recall letter. Customers with questions regarding the notice were instructed to contact the Customer Support Center: electronically at http://www.beckmancoulter.com/customersupport/support or via phone at 1-800-854-3633, in the United States and Canada. Customers with questions located outside the United States and Canada, were instructed to contact local Beckman Coulter representatives.
(1) RingLoc Bi-Polar Hip System Acetabular Cup ArCom: Acetabular Bi-Polar Cup, E1 Antioxidant Infused, 28 MM, 41 MM: Item No. 110010458; Lot No. 710930; UDI No. (01) 00880304568747 (17) 230614 (10) 710930 (2) RingLoc Hip system Acetabular Bi-Polar Cup: Acetabular Cup, ArCom, 41 MM OD, 28 MM ID: Item No. 11-165206, Lot No. 649750; UDI No. (01) 00880304001923 (17) 230614 (10) 649750 (3) RingLoc Bi-Polar Hip System Acetabular Cup ArCom: Acetabular Cup, ArCom, 52 MM OD, 28 MM ID: Item No. 11-
Zimmer Biomet is conducting a medical device recall for three lots of the RingLoc Bi-Polar Hip system Acetabular Cup. The affected lots were gamma sterilized twice. Sufficient data does not exist to support the functionality, shelf life, or package integrity for more than one-time sterilization.
All affected customers were sent a letter on 09/03/2020 stating the following : Zimmer Biomet is conducting a medical device recall for three lots of the RingLoc Bi-Polar Hip system Acetabular Cup. The affected lots were gamma sterilized twice. Sufficient data does not exist to support the functionality, shelf life, or package integrity for more than one-time sterilization. Zimmer Biomet will follow up w/ consignees that have not responded after the initial notification. Additional notifications via telephone, fax, email, or traceable carrier will be sent to those who have not completed the required certification form or provided surgeon and hospital information/confirmation. 100% of the delivery notifications will be accounted for. An inventory return certification form will be returned from each distributor that certifies that all available products from their territory have been returned or accounted for. Affected products that are not returned or accounted for will be considered as "not in inventory and unavailable for return." Zimmer Biomet will deem accounts unresponsive after 3 effectiveness checks if there continues to be no response are making reasonable efforts. Product that has not been recovered rom unresponsive consignees will be reported as unaccounted for. Product returned from the field will be scrapped.
PORTEX Bivona Cuffless Neonatal/Pediatric FlexTend Tracheostomy Tube, REF 60PFSS45
A specific model and lot number of Bivona Cuffless FlexTend Tracheostomy Tube may have been incorrectly packaged with a V-neck flange instead of a straight flange.
The firm initiated the recall by letter on 12/15/2020. The letter requested the following: "INSTRUCTIONS TO CUSTOMERS AND DISTRIBUTORS: 1. Locate affected product in your possession by referring to the Affected Devices List (Table 1) listed on this Recall Notice. 2. Determine the number of affected devices in your possession and complete the Response Form (Attachment 1) within 10 days of receipt, returning it to fieldactions@smiths-medical.com. The form must be returned even if you do not have any affected Bivona Cuffless FlexTend Tracheostomy Tube Devices in your possession. 3. All affected product must be returned to Smiths Medical for processing. A pre-paid return shipping label will be sent to you when the Response Form is returned indicating whether impacted devices are in your possession. When returning product please include a copy of the Response Form (Attachment 1) inside EACH BOX. 4. Product credit will be processed once the impacted product and Response Form (Attachment 1) has been received and processed. 5. DISTRIBUTORS: if you have distributed potentially affected product to your customers, please immediately notify them of this Recall with the editable Response Form for your customers (Attachment 1a) to respond appropriately."
Tube Tracheostomy and Tube Cuff, Bivona Cuffless Neonatal/Pediatric FlexTend" Tracheostomy Tube (model 60PFS45, lots 3991171, 3991172, and 3988103) V Neck Flange 4.5mm - Product Usage: intended to provide direct airway access for a tracheotomized patient for up to 29 days. It may be reprocessed for single-patient use up to 5 times.
Smiths Medical became aware that three lot numbers of a specific model of Bivona Cuffless FlexTend" Tracheostomy Tube (model 60PFS45, lots 3991171, 3991172, and 3988103) may have been incorrectly packaged with a straight neck flange instead of a V-neck flange. As a result, there is potential for patient injury if an incorrect device or accessory is selected for use. This use could lead to an internal injury resulting from excessive device contact with tissue, or an external patient injury due to external portions of the device pressing into or rubbing against tissue.
Distribution of the "URGENT MEDICAL DEVICE RECALL NOTICE" dated 01/29/2021 during the week of January 18, 2021.
DirectInject consists of a sterile dual paste system which is calcium phosphate based. Upon injection through the Mixer-Cannula, the two pastes form a cement paste which is moldable. The injected cement paste will harden under normal body conditions to form hydroxyapatite.
Inability for the user to inject the paste from the syringe into the target location.
On 04/01/2021, Stryker issued an Urgent Medical Device Removal notice via letter informing customers that users have reported the inability to push the paste through the Mixer-Cannula which prohibits the injection into a bone void.
Canon Aquilion Prime SP, Multislice Helical CT Scanner, TSX-303B/8L - Product Usage: intended to acquire and display cross-sectional volumes of the whole body, including the head.
A software problem has been identified which could result in the CT Scanner not proceeding to the next actual scan even though automatic start of the next scan is specified. This could result in the CT scan failing resulting in rescanning and reinjection of contrast medium.
On 11/9/2020, Canon issued a "Urgent: Medical Device Correction" letter to all affected customers via facsimile. In addition, to informing consignees about the recall, the firm ask affected consignees to take the following actions: 1. Until corrective action has been taken, in order to avoid the problem, please use the system with setting InstaView OFF according to the last notification (dated June 2020) Subject: Abnormality in Realtime Reconstruction Images. Please see Attachment A. 2. Please share this information with all users and reviewing radiologists as well as the clinical engineering or biomedical group at your facility. 3. If you have any questions, please feel free to contact Terry Schultz Regulatory Affairs Manager at (800) 421-1968 or your local Canon service representative at (800) 521-1968.
Skater Introducer Set 6F x 18cm. REF/UDI: 651506300/(01)00886333005000; 655506300/(01)00886333005079 - Product Usage: The Skater Introducer System with radiopaque marker is intended for fine needle puncture and tissue dilation with subsequent positioning of a guidewire for catheter placement in non-vascular procedures.
Tungsten coils of the guidewire included in the introducer kit were detaching.
On 04/26/2020, the recalling firm sent Urgent Medical Device Recall letter by email to the affected customer/hospital/distributor. The letter will identify the product, the problem, and the action to be taken by the recipient (customer).
FilmArray Blood Culture Identification (BCID) Panel Product Pouch Label: FilmArray BCID Panel Part No: RFIT-ASY-0126 Part No: RFIT-ASY-0127
Due to product complaints received for false negative results (dropouts) with blood culture identification panel potential caused by a pouch manufacturing error.
On 07/20/2021, the firm sent an "URGENT: MEDICAL DEVICE CORRECTION" Notification Letter to customer informing them that an issue has been identified in the manufacturing process which might contribute to elevated rates of false negative results while using the BCID Panel. Actions to be taken by customers: 1) Immediately examine their inventory for product identified in this recall, 2) Discontinue use and discard any remaining product in their possession that is subject to this recall. The Recalling Firm will replace the product at no charge in accordance with its standard limited warranty. 3) Complete the accompanying Field Action Acknowledgment of Receipt Form and confirm the number of pouches scrapped (if any). Return the Acknowledgment of Receipt to the Recalling Firm so that it may acknowledge their receipt of this notification. 4) If they may have further distributed the affected product, identify any recipients and notify them at once of this product recall. For product replacement, as well as any other questions or concerns, contact customer support department at Support@biofiredx.com or via telephone at 1-800-735-6544 and selecting option 5 for Product Technical Support.
Dexcom Receiver, REF: MT22719, (Black, Pin, Blue), Rx Only, containing software version SW10617 and revision 4.0.1.048 - Product Usage: A non-adjunctive invasive glucose sensor is intended to determine glucose levels, and the direction and rate of change of glucose levels in people with diabetes. The device is indicated to replace information obtained from standard blood glucose monitoring devices to make diabetes-related treatment decisions. The device also provides historical glucose informat
It has been reported that use of the mobile receiver with software version SW10617 rev 4.0.1.048 have reported: 1. the receiver becoming stuck on initialization screen when powering on. This will cause patients not to be able to receive glucose values or alerts; 2. Reinitialization of the receiver without user interaction. If this occurs, the receiver will either reboot and operate normally or require the user to press the Select button on the receiver in order to resume normal operation. In this situation, the user is provided an audio and vibratory alert every 5 minutes. Until the select button is pressed, patients will not receive glucose values or alerts.
On the date of August 16, 2019, Dexcom provided their consignees with an "Urgent Customer Notification - Please Read" letter concerning the recall via UPS. In addition to informing the consignees about the recall, the letter asked customers to take the following action: 1. Determine if your receiver is impacted: - The following Receiver Part Numbers are impacted (the receiver part number is located on the back of your receiver): Part Number: MT22719, Part Description: Dexcom G5 Mobile receiver (Black, Pink and Blue) 2. Determine if your software version is impacted: - Power on your Receiver - Navigate to the Main Menu - Press the Down Arrow and select Settings - Press the Down Arrow and select Device Info - The Part Number, Software Number and Software Revision are shown 3. If your Dexcom G5 Mobile Receiver software version is not 4.0.1.048, no further action is required. 4. Update Receiver Software using the Update Tool if Software Number is SW10617 and Software Revision is 4.0.1.048: - Go to: https://store.dexcom.com/user/login and sign in to your Dexcom Account. If you do not have an account, you can create one from this page. - Click on Update on the Update Tool icon: - You will be taken through a series of steps to update, which will take less than 15 minutes. - When the Update Tool download progress displays 'Update Verified ... all done', your Receiver will reboot and the Time/Date settings screen will display. At this point, the software download is complete. Confirm the date and time, and you can use your updated receiver. - For questions, please reference the Update Tool FAQs: https://www.dexcom.com/faq/how-do-i-install-update-tool 5. If your Dexcom G5 Mobile Receiver is not available, you can alternatively use the Dexcom G5 Mobile App to receive your glucose readings and alerts. This can be installed on your compatible smartphone by visiting the Apple Store or Google Play Store. For compatible devices and operating system
Angio Pack REF: AMS6908C, Sterile EO, Contents:1 Blade Scalpel # 11 SS 1 Bowl Guidewire 80 oz 4 Clamp Towel 2.5 1 Cover Probe 6X48 NS 2 Gown Surgical STD XLG NR 16 Label Custom 1 Counter Needle Nest 40 Sponge 4x4x12 plain 1 Syringe 10cc control polyc 1 Bag Band Dome 22 2 Prep ChloraPrep One-Step 3 1 Dressing Transparent 4 X 4 1 Glove Perry 6.5 PF Steril 1 Bowl Fluid Containment W/Li 1 Cover backtable 50 X 90 Zon 1 Cup medicine 2 oz clear 2 Stopcock 3 way rot m/l/l 2 Needle RB 22x 1.5 1 Spike B
Angio tubing included within Custom Convenience kits may contain insufficient or incomplete weld
On March 26, 2021, Windstone Medical Packaging dba Aligned Medical Solutions issued a "Urgent Medical Device Recall notification to affected consignees via US Mail. In addition to informing consignees about the recall, the firm asked consignees to take the following actions: 1. Due to the manufacturing process and finished sterilized packs, if any, in inventory, or at your facility, over labeling of inventory affected by this recall will be labeled with a sticker attached to each pack. The sticker will read: "Recall Notice Smith Medical announced the recall of the angio tubing contained in this kit after it was sealed and sterilized. All other components in the kit are not affected by this recall, 1. At the time the kit is opened for use any angio tubing manufactured by Smith Medical should be identified and set aside, 2 The recalled tubing should be rendered unusable to protect against inadvertent use and disposed of pursuant to the medical waste policies in effect at your institution. 2. Please complete the attached AMS recall reply form and return it to Aligned Medical Solutions at the Fax number provided on the form. If you do not have the affected product you must complete and return the AMS Recall Reply Form. replacement product will be issued upon request and completion of the attached Recall Reply For. 3 If you have any questions or concerns, please contact Vicki Davis, Quality Manager, 407-638-9924
BioFire BCID2 Panel, REF RFIT-ASY-0147, For FilmArray Systems, CE, Blood Culture Identification Panel in vitro diagnostic, Rx Only, UDI: (01)00815381020338
Elevated rates of false negative results may occur when using blood culture panels due to issues in the manufacturing process. Pouches contained OPP from FilmArray Blood Culture Identification Panel (BCID) instead of OPP from BCID2 Panel.
On 5/10/21, BioFire distributed a "Urgent: Medical Device Correction" letter to all consignees via: E-Mail. In addition to providing consignees with a recall notification, the firm ask consignees to take the following actions: 1 Immediately examine your inventory for product identified in this recall (BCI 2 Panel Pouch Lot # 11YA20/ Kit Lot # 2039020). 2. Discontinue use and discard any remaining product in your possession that is subject to this recall. BioFire will replace the product at no charge in accordance with Biofire's Standard limited Warranty 3.Confirm the amount of pouches scrapped (if any) on the attached acknowledgement of receipt form. 4. If you may have further distributed this product, please identify any recipients and notify them at once of this product recall. 5. Please complete the accompanying Field Action acknowledgement of receipt Form and return to BioFire so that BioFire may acknowledge your receipt of this notification. 6. If you have any questions or concerns, please contact our customer support department at support@biofiredx.com or via phone at 1.800.735.6544. 7. Adverse events may also be reported to FDA's MedWatch Adverse Event Reporting program.
PENTARAY NAV HIGH-DENSITY MAPPING CATHETER ELECTRODE EA 22 Rx only STERILE EO - Product Usage: The Biosense Webster PENTARAY NAV High-Density Mapping Catheter is indicated for multiple electrode electrophysiological mapping of cardiac structures in the heart, i.e., recording or stimulation only. This catheter is intended to obtain electrograms in the atrial and ventricular regions of the heart.
Mapping Catheter can become entrapped in the cardiac valvular apparatus while the user is attempting to create an electroanatomic map.
On 4/22/2020 the firm issued an "URGENT Medical Device Correction" letter via UPS/certified mail, informing them that as a result of 3 complaints in 2019 in which a catheter became entrapped in the cardiac valvular apparatus while the user was attempting to create an electroanatomic map, leading to the need for surgical intervention for removal, the firm is performing a correction to the products. The Notification Letter informs customers: Following are learnings that users of this product should be aware of to avoid or address entrapment: " Repeated rotation of the catheter near the valvular apparatus may result in the entanglement of the product spines and further rotation could result in entrapment, leading to the need for surgical intervention. " A common use scenario for repeated rotation leading to entanglement may occur during mapping of the right ventricle and accessing of the right ventricular outflow tract using clockwise rotation. Caution should be exercised with manipulation to avoid spine entanglement with valvular structures. " Entanglement of the catheter can be identified by resistance felt by the user and a lack of movement of the spines during manipulation, which can be seen via the CARTO 3 System or by fluoroscopy. The device may appear in a broom-like configuration with entangled spines pointing in a single direction. With opposite manipulation (e.g. counterclockwise rotation for initial clockwise rotation), it may be possible to free the entangled device for safe removal. " Do not use excessive force to remove the device when entangled or entrapped as it may lead to damage to the cardiac structures or to the device. The firm is instructing customers: 1. Please maintain awareness of this letter and pass it on to anyone in your facility that needs to be informed. 2. Please complete, sign, and return the Business Reply Form. We have communicated this information to the applicable regulatory authorities. Method of Notification/M
Arterial Line Kit 20ga X 3", Model 498411B, Rx Only, Sterile EO, UDI: 00886333215652 - Product Usage: Arterial Catheters are indicated for use when in instances where continuous invasive blood pressure readings and/or frequent blood gas measurements are required. Case Label: Arterial Line Kit 20ga x 3", Ref 498411B, Qty: 10/CS
Arterial Line Kits include thicker curved reverse-cutting needle with a 0-silk suture, instead of the usual straight-cutting needle with a 3-0 silk suture. The thicker suture may be more difficult to tie. The curved needle requires the use of a needle driver, there is a risk of needle stick to the surgeon tries to do it with fingers instead.
Argon Medical Devices, Inc. sent Urgent Medical Device Recall letters, dated April 7, 2020 by mail on April 8th to the affected customer/hospital/distributors. The letter states they shipped Arterial Line Kits that include a different suture set than what is normally packaged in the kits the customers order. The kits customers normally order include a straight-cutting needle with a 3-0 silk suture. The kits customers recently received from them include a curved reverse-cutting needle with a 0-silk suture. A list of the affected product numbers is provided in the letter. They immediately corrected the production error that created this situation and reestablished their supply of Arterial Line Kits with the correct suture set. If customers would like to exchange the Arterial Line Kits they received for kits containing the correct suture set, they will gladly exchange these kits at no cost. Conversely, they understand the rise of the recent COVID-19 pandemic put Arterial Line Kits in high demand in the United States. Therefore, they do not require customers to return the affected Arterial Line Kits if they would prefer to use them as-is. To facilitate an exchange of the product received customers can contact Argon Medical Customer Service at 1-800-927-4669 or customer.service@argonmedical.com. If customers would prefer to use the product as-is, no further action is necessary. The letter included a form for customers to acknowledge receipt and account for product inventory and submit for exchange if they wish.
Healgen COVID-19 IgG/IgM Rapid Test Cassette (Whole Blood/Serum/Plasma) REF GCC)V-402a - Product Usage: is a lateral flow immunoassay intended for the qualitative detection and differentiation of IgM and IgG antibodies to SARS-CoV- 2 in human venous whole blood, plasma from anticoagulated blood or serum.
Due to two (2) issues: 1) The firm distributed COVID-19 Rapid Test Cassettes outside of the Emergency Use Authorization to non-certified Clinical Laboratories. 2) COVID-19 Rapid Test Cassettes were not adequately validated for its intended use (fingerstick tests for in-home use/testing).
On 01/29/2021, the firm emailed an "URGENT: MEDICAL DEVICE RECALL" Notification its customers and distributors informing them that Recalling Firm may have distributed products to facilities that do not meeting the conditions outline in the Emergency Use Authorization (EUA) which stipulates that only laboratories certified under Clinical Laboratory Improvement Amendments of 1988 (CLIA) to perform moderate or high complexity tests are authorized to receive and utilize the products. Use of these tests by non-certified laboratory facilities may result in false-positive test results and may lead to an incorrect assessment, such as mistaken immune response to the COVID-19 virus and may delay treatment and risk the further spread of infection to others. The Recalling Firm is planning on sending a follow-up Customer Notification Letter via UPS on or about 02/12/2021. The "URGENT: MEDICAL DEVICE RECALL" Notification instructs customers: 1) To minimize unauthorized use of these products, discontinue the use these products outside of a CLIA accredited or compliant Moderate or High Complexity laboratory setting. 2) Acknowledge the receipt of this notice by completing the attached Response Form, scanning and emailing the completed form to: Regulatory@confirmbiosciences.com Customer are asked to complete the response form and return immediately, no later than March 31, 2021. To correct this issue, the Recalling Firm will work with its customers to either: -Affirm the Customers authorization to use these products through their CLIA Number and Status -Coordinate the return of unused, unopened products to the Recalling Firm. For any questions regarding this recall, call 800-908-5602 or email Regulatory@confirmbiosciences.com (Monday thru Friday 8:00 a.m. to 4:00 p.m. Pacific Time)
RUSCH CARE Premium Drain bag, 2000mlm REF 390000 urine collection device
The device labels are not UDI compliant. The missing UDI compliance information on the labelling is not likely to affect the function/performance of the device itself. Other label information and warnings are unaffected by this labelling.
The firm, Teleflex, sent an "Urgent Medical Device Recall" letter dated 01/14/2019 to its customers. The letter described the product, problem and actions to be taken. The customers were instructed to discontinue the use of the products and quarantine them, and complete the enclosed Recall Acknowledgement Form as soon as possible indicating whether you do or do not have stock and fax it to 1-855-419-8507 or email to recalls@teleflex.com or hand it to your sales representative. A customer service representative will contact you with a Return Goods Authorization (RGA) number and provide instructions for the return of products. Distributors were directed to notify their consignees. The recalling firm is seeking the return of the affected products. If you have any other questions, feel free to contact your local sales representative or Customer Service at 1-866-396-2111.
Cyberonics VNS Therapy AspireHC Model 105 Generator, 26-0007-4000/3. The firm name on the label is CYBERONICS, INC., Houston, TX. Vagus nerve stimulator.
This recall is an expansion of Z-3019-2017 and Z-3020-2017, which was initiated to fix the devices premature battery depletion, caused by electrical leakage on the circuit board assemblies of the Models 105 and 106 generators. *Note this recall occurred in November 2018.
The recalling firm issued Dear Doctor letters dated 11/16/2018 explaining the reason for the voluntary correction and pointing out a correction was previously initiated in June, 2017, related to this issue for devices distributed prior to October, 2015.
Intelligent Peri-Analytical Workstation (HW+SW), Catalog #: A89492 (iPAW Software v4.2.1), Beckman Coulter, Inc. The iPAW ((intelligent Peri-Analytical Workstation) can act as: a software client for specimen tracking and workload statistics or a physical workstation for manual sorting and label printing.
Sorting-Drive software version 4.2 (released in October 2015) introduced a new option for iPAW and the Sorting-Drive Client that is used for manual printing of barcodes. Sorting Drive software version 4.2 was replaced by 4.2.1 (both versions contain the same option for manual barcode printing). When printing consecutively numbered tube labels using this optional Barcode Counter function, the system incorrectly converts numbers with consecutive multiple zeroes in the middle, potentially leading to wrong barcode IDs. The firm reports this does not affect automated label creation or reprinting of individual labels and that no other system functions are affected.
On 6/4/2018 Beckman Coulter (BEC) reported that the issue will be corrected via a field modification performed by Field Service. BEC reported that they do not intend to send a customer letter for this issue.US customers can contact the Technical Support Troubleshooting Hotline at (800) 854-3633.
MedSchenker Smart Transport Medium (STM) System: CULTURE MEDIA, NON-SELECTIVE AND NON-DIFFERENTIAL - MULTIPURPOSE CULTURE MEDIUM - Product Usage: intended for the collection and transport of clinical specimens containing viruses, from the collection site to the testing laboratory. I
Discoloration and turbidity were present in the specified lots of STMs because of Longer Monsoon season at the South Korean Manufacturing Facility.
The firm did not give out a public statement of a recall or recall strategy as it only affected one client and was specific to two identified lots. the firm did notify the customer of the issue via phone and email.
HeartStart MRx Monitor/Defibrillators with model numbers M3535A M3536A, M3536M, M3536MC, M3536M2, M3536M3, M3536M4, M3536M5, M3536M6, M3536M7, M3536M8, and M3536M9.
Philips has received a number of reports of HeartStart MRx Monitor/Defibrillators that have suffered internal damage and were not able to deliver therapy after having been dropped or subjected to a severe mechanical shock, even though the device did not have visible external damage or the Ready for Use ( RFU ) indicator on the unit did not immediately indicate a problem. One of these reports involved a death of a patient who could not be resuscitated.
On February 26, 2020, the firm distributed Urgent Medical Device Correction letters to affected customers. Customers were informed that if the device is dropped or subjected to a severe mechanical shock, it may suffer internal damage even in the absence of visible external damage or the Ready for Use indicator unit does not immediately indicate a problem. Customers were instructed to inform all users that if the device is dropped or subjected to severe mechanical shock and the exterior case is still intact, they should immediately perform an operational check as described in the IFU section "Performing the Operational Check" in the Maintenance Chapter. The unit should be taken out of service and Philips Customer Service contacted if the unit is visibly damaged or if the device fails the operational check, i.e., if the RFU indicator changes to a red-X or the device emits a periodic audible chirp, as described in the IFU. Customers were instructed to insert a copy of the customer notice into each copy of the HeartStart MRx IFU. If you need further information or support concerning this notification, please contact your local Philips representative or call the firm at 1-800-722-9377.
Olympus CHF-CB30S Choledoscope Intended Use: The device was designed to be used with an Olympus TV camera system, light source, TV monitor, endo-therapy accessories and other ancillary equipment for endoscopic diagnosis and treatment within the biliary tract (common bile duct, cystic duct, and hepatic duct).
The CHF-CB30S Device did not have a 510(k) clearance. Additionally, the device has been associated with breakage of the insertion section and protrusion of metal parts, as well as breakage and displacement of the rubber on the bending section during surgical procedures.
All affected customers were sent a "URGENT: MEDICAL DEVICE REMOVAL ACTION" letter on 08/31/2020 stating the following: Olympus Corporation notified direct customer accounts on 08/31/2020 via recall notification letter. Letter states reason for recall, health risk and action to take. Actions to be taken by customers including the following: 1. Inspect your inventory and identify any CHF-CB30S devices. 2. Cease any further use of any CHF-CB30S device you have, remove it from your inventory and quarantine it until it is shipped back to us. 3. Call your Olympus customer service representative at 1-888-524-7266 option 1. Olympus will issue a Return Material Authorization for you to return any CHF-CB30S at no charge. 4. Olympus will reimburse you for each returned CHF-CB30S. Please contact our customer Service representative as indicated in step 3 for the reimbursement amount for your CHF-CB30S choledoschope. 5. Access the Olympus recall portal to indicate that you have received this notification. go to https://olympusamerica.com/recall. Enter the recall number Recall-0365 and provide your contact information as indicated in the portal. 6. If you may have further distributed the CHF-CB30S, please identify your customers, notify them at once of this product recall, and appropriately document your notification process. Your notification to your customers may be enhanced by including a copy of this recall notification letter. OMSC requests you to report any patient injuries associated with any OMSC endoscope. Call our Technical Assistance Center (TAC) at 1-800-848-9024, option 1 to report complaints. If you have any questions or concerns, please do not hesitate to contact me directly at 484-896-5688 or at laura.storms@olympus.com.
CAS-930A Flat Panel Monitor (FPD) used in conjunction with the Canon Interventional Angiography System, Model numbers: Infinix-8000C and Infinix-8000H - Product Usage: This device is a digital radiography/fluoroscopy system used in a diagnostic and interventional angiography configuration. The system is indicated for use in diagnostic and angiographic procedures for blood vessels in the heart, brain, abdomen and lower extremities.
There is a potential that the cable of the Flat panel detector may break during a procedure which may cause the x-ray device to stop before the examination is completed. This could result in a delay with procedure and/or potential damage to the patients blood vessels due to removal without visibility.
On 10/08/2020, Canon Medical Systems sent a "Urgent: Medical Device Correction" Notification to all affected consignees via Fax. In addition to informing consignees about the correction, Canon as consignees to take the following actions: 1. On a daily basis, prior to the installation of the new cable with the modified routing, please perform the start-up inspection described in the Operation Manual to confirm that the FPD up and down movement operates normally. Additionally, please have available a mobile device which can perform fluoroscopy such as a surgical C-arm device or another catheter inspection/IVR room. 2. If the above event occurs, please stop using the device and contact your Canon service representative. . 3. Please share this information with all users and reviewing radiologist as well as clinical engineering and the biomedical group at your facility. 4. Please complete and return the attached form and fax it to the toll free number at the top of the form. This form may also be sent via email to RAffairs@us.medical.canon. 5. Thank you for your prompt attention to this matter. If you have any questions, please feel free to contact Terry Schultz Regulatory Affairs Manager at (800) 421-1968 or your local Canon service representative at (800) 521-1968.
Kowa VK-2s software Version 10.0.4.0, Product code 04987646809500 installed on Kowa nonmyd WX Retinal Cameras - Product Usage: is indicated for acquiring, displaying and storing image data from KOWA s mydriatic and non-mydriatic ophthalmic cameras.
It has been determined that the software distributed with the retinal camera may delete patient information. Specifically, if multiple IDs are delated at the same time, their is a potential for all patient information to be deleted. This could result in delay of treatment.
On 11/03/2020 Kowa Company mailed a "Urgent Medical Device Recall letter to all affected consignees. In addition to informing consignees about the recalled software, the firm asked consignees to take the following actions: 1. The service team at Kowa will contact each customer and remove version 10.0.4.0. on all workstations and provide version 10.0.4.100. A CD of version 10.0.4.100 will be mailed to each customer, but the removal and software update will be performed remotely. Other Information: 2. Complete the Medical Device Acknowledgement and receipt form and fax completed response form to : 310-327-4177 ATTN: Benjamin Rhodes or mail to: Kowa American Corporation, 20001 South Vermont Avenue, Torrance, CA 90502. 3. " For more information, please contact Benjamin Rhodes at brhodes@kowa.com " For specific information regarding the remote software update, please contact service@kowa.com
Box Label: ION Fully Articulating Catheter, REF 490105, VER 08 - Product Usage: used to navigate the Ion Fully Articulating Catheter within the lung to a planned path in order to sample a target. User Manual: ION Endoluminal System, System, Instruments, and Accessories User Manual, PN 553990-05 REV. A 2019.12
The distal tip ring of the fully articulating catheter may become dislodged during the procedure.
On 10/23/2020, the firm sent an "Urgent Medical Device Correction" Notification to customers via a courier service informing them of the potential for the distal tip ring to become dislodged. All lots of the affected product (VER: 08) are potentially impacted. The Recalling Firm is instructing customers to: 1.) Prior to start of the procedure, with the Vision Probe fully inserted and connected to the back end of the Catheter, ensure that the Vision Probe does not extend beyond the Catheter. a. If the Vision Probe extends past the Catheter do not use the Catheter in a procedure. 2.) At the end of the procedure, confirm that the distal tip ring is still intact (with the Vision Probe fully inserted and connected to the backend of the Catheter, confirm that the Vision Probe does not extend beyond the Catheter. a. If the Vision Probe extends past the Catheter, perform fluoroscopy to ensure that the Catheter distal tip ring does not remain in the patient. In addition, please follow the instructions outlined in the Ion System, Instrument and Accessories User Manual (PN 553990), specifically: 1.) Inspect all instruments and accessories for potential damage prior to clinical use. 2.) Use only compatible Cook Captura biopsy forceps. Failure to use compatible forceps may result in stuck forceps or Catheter damage. a. Ensure that the Cook Captura biopsy forceps are fully closed when withdrawing into the Catheter after biopsy. b. Slowly insert and retract (do not use excessive force or rapidly withdraw) the Cook Captura biopsy forceps into the Catheter. If the Catheter distal tip ring is missing at any point during inspection, contact Customer Service immediately and return the Catheter and the distal tip ring, if available, through the standard RMA process. In addition, the Recalling Firm is asking customers to: 1. Inform necessary hospital personnel about this issue 2. Complete the attached Acknowledgement Form and return via email Recalls@intusurg.com Att
REF MC330209 6' (15 cm) Appx 0.09 ml, Smallbore Trifuse Ext Set w/3 MicroClave Clear, 0.2 Micron Filter, 1.2 Micron Filter, 3 Clamps (Blue, Yellow, White), Rotating Luer - Product Usage: The intravascular administration set is a single use, sterile, non-pyrogenic device, which provides access for the administration of fluids from a container to a patient s vascular system through the administration set s needle catheter (which is inserted into a vein). Directions for Use: icumedical IV Extensio
Incorrect filter assemblies in IV administration set.
On 07/01/2020, the firm sent an Urgent: Medical Device Recall" to customers via mail, by third party to inform them that the firm has become aware that there is a potential problem related to the IV administration set with incorrect filter, which may result in delay in therapy, contamination or particulate embolism. This recall affected specific lots. The firm is instructing customers to discontinue the use, distribution and quarantine the products, print the return label from http://expertezlabel.com and return the affected devices to third party contracted service and if questions, to contact ProductComplaintsPP@icumed.com or 1-844-654-7780 for adverse event or complaints and for additional assistance, to call 1-866-829-9025, option 8 or customerservice@icumed.com. .
November 2022
Convex Two-Piece Ostomy System (Skin Barrier) marketed under the following brands: 1) Combihesive Natura Durahesive 2) SurFit Natura Durahesive 3) Natura 4) Varicare Product Usage: stoma management
ConvaTec has received complaints associated with use of convex two-piece skin barriers where the starter hole (stoma hole) is off-center on product manufactured from February 2017 to September 2018. FDA became aware of this problem via routine MDR monitoring.
The firm began notifying their consignees by telephone on 09/06/2019 and followed with a letter on 09/11/2019. The letter identifies the products and lots involved, describes the problem and states that Convatec will accept product returns of affected product.
Merge PACS
Measurements done on the Merge PACS generated MPR s may have incorrect measurements.
The firm, IBM Watson Health, sent an "Urgent Field Safety Notice" dated 05 August 2020 to its customers. The letter described the product, problem, and actions to be taken. The customers were instructed to do the following: Avoid incorrect pixel measurements by using the following workflow: Step 1: Modality acquires a series and generates reformat and sends to Merge PACS Step 2: Radiologist performs measurement on these series from the modality. Avoid black dots that may lead to additional imaging by taking any of the following actions: - Verifying study images either at modality or in another viewer. - Increasing the window level will window out the lowest pixel value (the black dots). - Viewing additional images/series within the study. Viewing of prior series/studies. - Verifying patients history, diagnosis or other clinical data. IBM Watson Health/Merge Healthcare will provide a software correction to address these issues. A representative will be in contact with you to schedule the software update. Please ensure all potential users of Merge PACS v8.1, 8.1.1 and 8.1.2 have received this notice. Please provide this notice to other organizations impacted by this action. If you have any questions regarding this notice, please contact Customer Support at WHISupport@us.ibm.com or 877-741-5369.
Corin BIOLOX DELTA MOD HEAD 32mm EX LONG +7mm 12/14 TAPER. Corin Trinity Acetabular System with Extra Long Heads/Trinity Biolox Delta Ceramic Head (Generic Name: Hip Prosthesis). The Trinity Acetabular System is a modular acetabular cup system consisting of a press fit, titanium alloy shell; acetabular liners in neutral offset, +4mm offset, +4mm oblique, neutral 4mm EPW; and ceramic and CoCrMo modular heads. The ceramic and CoCrMo modular heads are compatible with Corin titanium femoral stems
The size indicated on the labeling on the outer packaging, on the inner packaging, and on the patient stickers inside the packaging is incorrect: the Trinity Biolox Delta Ceramix Head 32XL is labeled as 36XL and vice-versa.
The firm contacted their consignee by email on 01/25/2021. The distributor was instructed to identify the affected product in its inventory and return it to Corin USA in order to contain the part. A recall letter will be sent and acknowledgement of receipt will be requested.
Evolut (TM) R System. With the following model numbers: a. EVOLUTR-23, Labeled as VLV EVOLUTR-23 VT IR 6L COMM OUS, VLV EVOLUTR-23 TAV EVOLUT R CE 29L MX, VLV EVOLUTR-23 TAV CE AU 2Y MX, VLV EVOLUTR-23 TAV JPN MX, VLV EVOLUTR-23 GREY 29L COMM OUS, VLV EVOLUTR-23 TAV EVOLUT R CE 7L MX, VLV EVOLUTR-23 TAV EVOLUT R CE 26L MX, VLV EVOLUTR-23 TAV CA 2Y MX, VLV EVOLUTR-23 GREY 6L COMM OUS, VLV EVOLUTR-23-US TAV 23 US COMM MX; b. EVOLUTR-23-C, Labeled as VLV EVOLUTR-23-C TAV EVOLUT R US IDE MEX;
Potential for Transcatheter Aortic Valve (TAV) leaflet damage when performing a post-implant balloon dilatation (PID).
On 10/23/2020, the firm sent an "Urgent Medical Device Correction" Notification Letter to customers via UPS 2-day delivery informing them that the Recalling Firm has received complaint of valve leaflet damage occurring following a post-implant balloon dilatation (PID) resulting in moderate or severe aortic insufficiency which were detected acutely or during follow up. The Recalling Firm has identified the potential cause of the damage which is due to over-expansion of the narrowest portion (waist) of the Transcatheter Aortic Valves (TAVs). The Recalling Firm is also stating that depending on the choice of balloon, the physicians must consider two factors that may lead to over-expansion of the waist of the TAV: 1.The pressure the balloon is inflated to when performing PID 2.Balloon size used for PID The Recalling Firm is providing detailed guidance on considering the above two facts and is providing in an Appendix (Appendix A) with the Customer Notification Letter. In addition, the Appendix A is providing updated precautionary instructions related to PID. The Recalling Firm is also informing its customers that for patients who have been, or will be, treated with the affected product, should continue to be managed according to their standard patient management protocols. Physicians are also asked to: - Review the updated instructions provided in Appendix A. - Share this information with other physicians in your facility who use the affected product. - After review of this information, complete the enclosed Physician Confirmation Certificate and email to rs.cfqfca@medtronic.com. Any Questions can be directed to the Recalling Firm's Field Representatives or Lifeline Technical Services at 1-877-526-7890, Monday-Friday, 8am-5pm Central Time.
BD Hypodermic Syringe 10 ml, eccentric tip. Catalog (Ref No.) 305482
The product packaging for the 10 ml eccentric tip syringe may exhibit open seals. An open seal impacts package integrity and potentially compromises sterility of the syringe.
On 01/13/2020 BD issued an Urgent Medical Device Recall notices to distributors via letters and via e-mail. Distributors are requested to identify their customers and provide BD a customer list so that BD can undertake further communication to the users. BD will distribute the recall communication to the distributors customers via FedEx upon receiving the customer information from the distributors. A copy of the BD product recall customer letter will be provided to distributors, in the case they opt to contact their customers directly.
Oxygen Sensor Model K54019-2 used in the: G185 & G210 Incubators and G603 Work Chambers Oxygen Sensors supplied for use in the following incubator and work chamber products; G185 Standard 110V, G185 SensorTech 110V, G185 Standard 230V, G185 SensorTech 230V, G210 InviCell Standard, G210 InviCell Standard US, G210 Invicell Plus Optional pH and External Monitoring, G603 Work Chamber 115V, & G603 Work Chamber 230V. [CooperSurgical part numbers K22400-110, K22200-110, K22400-230, K22200-230, K59500
Units are displaying output readings that differ from the measurements taken using a Gas Analyzer. When the display is reading a target setting of 5%, an external meter is reading between 3% and 12% and the Incubator does not alarm. May result in loss of embryo during storage.
CooperSurgical notified affected affected Regionals and Countries and through the Sales Managers to Affected Consignees by Urgent Field Safety Notice Oxygen Sensors letter via email on 6/30/21. Letter states reason for recall, health risk and action to take: If the affected product at your facility is displaying any of the above characteristics, please complete the attached Acknowledgement and Receipt Form to arrange for an onsite field service call at CooperSurgicals expense. Otherwise, this issue will be addressed at your next onsite routine service at no expense for the correction. Please be advised that we are expecting the Oxygen Sensor replacement to be approximately an extra 2.5 hours during this service. If you do not have affected Oxygen Sensors in inventory, please use the same enclosed Form to indicate that and return it to CooperSurgical so that we may document receipt of this Field Safety Notice. Please feel free to reach us at +001.203.601.5200 ext. 3300 with any questions regarding this notice.
GE Healthcare Precision 600FP, Classical R&F (radiographic and fluoroscopic) System - Product Usage: Intended for use by a qualified/trained doctor or technologist on both adult and pediatric subjects taking diagnostic radiographic and fluoroscopic exposures of the whole body, skull, spinal column, chest, abdomen, extremities and other body parts.
GE Healthcare has become aware of a potential safety issue associated with the improper installation of the Precision 600FP monitor suspension. A partial detachment of the monitor suspension could result in potential injury to a patient or operator.
The firm issued an urgent medical device correction notice by letter on 12/10/2020. The letter states: "You can continue to use your Precision 600 FP monitor suspension under the following condition. If you observe any abnormal movement or misalignment of the monitor suspension in day to day performance controls, discontinue use and contact your GE Healthcare Service Representative immediately." Customers with questions or concerns may contact GE Healthcare Service at 1-800-437-1171 or your local Service Representative.
Barco MDNC-3421 DISPLAY, DIAGNOSTIC RADIOLOGY
A number of MDNC-3421 displays were shipped while not being DICOM-compliant. These displays will not pass DICOM acceptance tests.
On January 22, 2021 the firm notified the importer in the USA, Barco Inc.
EcoFit cup cementless: Model(Catalog Number)/Description: 02200046 /EcoFit cup cementless 46mm dia incl. central hole cover; 02200048 /EcoFit cup cementless 48mm dia incl. central hole cover; 02200050 /EcoFit cup cementless 50mm dia incl. central hole cover; 02200052 /EcoFit cup cementless 52mm dia incl. central hole cover; 02200054 /EcoFit cup cementless 54mm dia incl. central hole cover; 02200056 /EcoFit cup cementless 56mm dia incl. central hole cover; 02200058 /EcoFit cup cementless
A risk exists during impacting of the acetabular cup into the bone the plugs may come loose from the cup, which could lead to operation duration extension or revision operation. A warning note is being added to instructions for use and surgical technique alerting users that the quality of bone in the patient (such as osteosclerosis) is an attributable factor.
On May 10, 2021 Urgent Safety Information notices were emailed to customers who were asked to take the following action: 1. Read this safety information carefully and make sure all relevant departments and officeholders are informed about its content. 2. Keep this safety information. 3. Fill in and return the reply form. Customers with additional questions were encouraged to contact Wendy Ryan-Kettler at WRyan@implantcast-na.com On 17 May, 2017, a follow-up Medical Device Correction notice was emailed to customers who were asked to take the following additional actions: 4. Destroy the affected (previous) surgical technique and instruction for use (IFU) and replace them with the updated versions that accompanied this safety information.
BodyGuardian Heart Remote Monitoring Kit, consisting of two BG Heart monitors, either Models BC-1001-A or BC1001-D, and a cell phone, either Models BP1008 or BP10014, that is paired to both of the monitors.
The device data being collected and transferred to the monitoring center may not be accurate due to nonvalidated association between the phone software and the heart monitors, therefore, the patient's report should not be used to evaluate their condition.
On 8/6/2019, the recalling firm contacted or attempted to contact by phone all patients that had potentially impacted devices. Phone communication to the physicians of the patients also began on 8/6/2019. All patients that agreed were sent new devices to replace the affected one to finish their study.
INTEGRIS Allura 9, System Code 722018 Vascular, cardiovascular and neurovascular imaging applications, Cardiac imaging applications including diagnostics, Non-vascular interventions
There is a potential for the Monitor Ceiling Suspension, which holds a large screen monitor, may detach from the actuator rotor shaft causing the monitor to fall from the ground. When a Monitor Ceiling Suspension detaches from the actuator rotor shaft and the monitor falls, there is a risk of injury for the patient, user and bystander.
The firm, BU IGT System, sent an "Urgent -Medical Device Correction" notification letter dated 07/16/2018 to customers. The letter describes the product, problem and actions to be taken. The letter instructs customers to do the following: In order to reduce the risk for patients, users and bystanders if this problem would reoccur, we recommend the following actions until the correction has been implemented. -Avoid unnecessary movements of the Monitor Ceiling Suspension. -For those movements that are necessary, avoid that the user, patient or bystander are in close proximity to the monitor. -When moving the Monitor Ceiling Suspension, ensure that no body partsof the staff or patient are underneath the monitor. -Do not move the monitor above the patient. Please ensure that all staff with access to the affected systems are informed of the content of this Medical Device Correction. All affected products will be corrected by means of a Field Change Order (FCO) free of charge. This FCO will be available mid-August. You will be contacted by our local Philips representative to schedule this corrective action. If you need any further information or support concerning this issue, please contact your local Philips representative: Technical Support Line: 1-800-722- 9377, 8am to 8pm (EST) Monday thru Friday.
Each KWIK-STIK unit contains a lyophilized microorganism pellet, an ampoule of hydrating fluid, and an inoculating swab. Each device is sealed within a laminated pouch that contains a desiccant to prevent adverse moisture accumulation. KWIK-STIK microorganisms are 3 passages or fewer from the reference culture and are guaranteed to recover when processed using the recommended media and incubation requirements. Available in packs of 2 or 6.
KWIK-STIK 2 Pack Klebsiella pneumoniae derived from NCTC 13443 (Catalog# 01145P) should contain the NDM-1 positive strain, but was confirmed to be NDM-1 negative.
The recalling firm is sending consignees recall notification letters beginning 10/08/2020 via email. The correction communication was first extended to the first level of the distribution change (those who received product directly from Microbiologics). Distributors outside of the US will be contacted via email, and if follow up is necessary, the recalling firm's international sales team will work with each distributor to ensure this communication is extended to their end users. The recalling firm is working with its European Authorized Representative to coordinate this field safety corrective action in the EU.
VesselNavigator application used with Philips Azurion (Azurion 7 Series) Software R1.2 and R2.0, and Philips Allura Xper R9, upgraded to Azurion 1.2 M20. System codes: Azurion 7 B12 (722067), Azurion 3 B20 (722068), Azurion 7 M12 (722078), Azurion 7 M20 (722079), Field Extensions Azurion 7 series (722136), Allura Xper R9 (722303). The product is software, used during an endovascular intervention procedure.
Due to a software defect, when a digital subtraction angiography (DSA) is exported to the VesselNavigator application, the DSA is displayed without subtraction.
On 12/23/2019, the firm sent medical device correction letters to affected customers via certified mail. The firm will be contacting customers with affected systems. The firm will be implementing software updates in all affected systems to correct the issue which was made available by the end of December 2019. The user was asked to do the following: -Please suspend the use of Digital Subtraction Angiography images for the verification of the registration during the Live Guidance step. -Please ensure that all staff working with the VesselNavigator application are informed of the recall. If you need further information or support concerning this issue, please contact your local Philips representative or call Technical Support Line at 1-800-722-9377.
Allura Exper FD Series. System codes 722003 722010 722022 722005 722011 722019 722001 722002 722006 722012 722008 722013 722020 722025 722015 722023 722038 889006 889016 889009 722005 The device is an X-Ray Generator.
A capacitor inside the converter of the Velara X-ray generator may fail after a large number of surges in a short period of time. When this occurs, no image acquisition is possible.
On December 30, 2019, the firm notified customers via Medical Device Correction letter. Customers were informed of the product issue and advised to do the following: If the capacitor of the Velara X-Ray fails as described (capacitor failure after large number of surges in a short period of time), please switch off the system, take it out of service immediately, and contact your local Philips representative. The firm will be resolving the issue by replacing a Printed Circuit Board (PCB) in the convertor, which prevents the capacitor from failing. PCB replacements started in January 2020. Customers will be contacted by their local Philips representatives to schedule a date for the PCB replacement. Customers with further questions should contact the Technical Support Line: 1-800-722-9377.
Atec Insignia Anterior Cervical Plate System, REF 136-0116, Insignia, ACP, 1-Level, 16 mm, Rx Only, Non-Sterile, UDI: (01)00190376268422
There is a potential for the screw blocking mechanism on the anterior cervical plate system to disassociate intraoperatively/postoperatively or unlock postoperatively.
Between the dates of 4/27-28/2021, Alphatec Spine, Inc., distributed a "Urgent-Medical Device Recall Notification" . The notification was distributed via FedEx and E-Mail. In addition to informing consignees about the recall, Alphatec Spine Inc. asked customers to take the following actions: 1. Please promptly review your inventory to determine if any of the affected product listed above is within your possession. 2. Please abstain from sale and/or use and contact Alphatec Spine Customer Service for instructions on how to carry out a product return. All shipping instructions will be provided, including arrangements for product replacement. 3. Please fill out the last page of this letter to confirm that you have read this notification and have taken all necessary actions as described in this notification. 4. Please return page 4 (signed) of this letter using one of the methods below: Mail to: Alphatec Spine, Inc., 1950 Camino Vida Roble, Carlsbad, CA 92008 ATTN: Hylene Valdez Email to: QMScompliance@atecspine.com 5. Please share this notice with all those who need to be aware within your organization or any organization where the affected product has been transferred. 6. Adverse reactions or quality problems experienced with the use of this product may be reported to Alphatec at 1-800-922-1356 or 1-760-431-9286. The FDAs MedWatch Adverse Event reporting program can also be used, via email, on-line or fax.
Disposable Sampling Tube, REF VSM01, Contents: Transport Media - 50, Nasal Swab - 50, Package Insert - 1, IVD, CE
Verification and validation of the virus transport medium tubes was not provided to FDA prior to sale and marketing
Krishe sent a "Urgent: Medical Device Recall" dated 3/11/21 via to all affected consignees via Fed Ex. In addition to informing consignees about the recall the firm ask consignees to take the following actions: 1. If you have any of the virus transport medium tubes, please immediately stop selling and using them. Please place them in quarantine and follow the instruction for return and credit that accompany this letter. 2. Please complete the attached acknowledgement and receipt form and return within 5 business days. If you do not have any of the recall product, we ask that you still completed the form and return it within 5 days. 3. If you have any questions, or for a return authorization, please contact Vipul Tailor, via telephone at 734-748-9580 or email vipul@krishelimited.com. 4. Adverse reactions or quality problems experienced with the use of this product may be reported to the FDA's MedWatch Adverse event Reporting program either online by regular mail or by fax.